Drag to orbit. Choose "Place" and click floor, or "Aim" and click object.
Stereo pair captured. Camera poses are frozen; the room can still be orbited at any step.
Orbit enabled
STEREO PAIR LOCKED
Select one point in Image A
0 / 6
NEXT: CHOOSE xA
Click Image A
Choose one visible feature to trace through the geometry.
INPUTcaptured Image A
RESULTwaiting for xA
ACTUAL SCENE HIT—
FULL REFERENCE
Camera parameters & complete derivation
The upper workspace stays focused on the active step. This section keeps the fixed camera geometry and the entire six-step derivation available for review.
Select a point above to populate the derivation
Camera A pose
Center CA—
Yaw / pitch—
Camera B pose
Center CB—
Yaw / pitch—
Shared intrinsics
Baseline—
Vertical FOV—
Focal length—
1 · Homogeneous pixel
xA = [u, v, 1]T
Represent the selected pixel in homogeneous image coordinates.
2 · Back-project ray
dA ∝ RATSxKA−1xA
Sx = diag(−1, 1, 1) applies the same horizontal image convention used by the renderer before rotating the ray into the world.
3 · Epipolar plane
nπ = (CB − CA) × dA
The baseline and Camera A ray span the epipolar plane.
4 · Essential Matrix
R = SxRBRATSx t = SxRB(CA − CB) E = [t]×R
The relative pose is expressed in the same image-coordinate convention as the rendered camera views.
5 · Fundamental Matrix
F = KB−TE KA−1 lB = F xA
F maps the selected pixel in Image A to its epipolar line in Image B.
6 · Verify constraint
xBTF xA = 0
TRUE xB—
RESIDUAL—
LINE SEGMENT—
The known 3D hit is projected into Camera B and checked against the line.
REFERENCE
Epipolar geometry reference
R. I. Hartley and A. Zisserman, Multiple View Geometry in Computer Vision, 2nd ed., Cambridge University Press, 2004. The Essential Matrix, Fundamental Matrix, epipolar-line, and epipolar-constraint equations follow the standard two-view geometry formulation presented in this text. This simulator additionally applies Sx = diag(−1, 1, 1) consistently to account for its chosen horizontal image-axis convention.